Welcome to Sunmine equipment Corp,top Chinese home appliance and automotive appliance supplier

PRODUCT

CONTACT

Tel:0550-6822011/6810061
Mobile phone:+8618805503229/+8618609602222

Fax:0550-6822026
Zip code:239000
Website:www.sunmine.com.cn
E-mail:XM211@sunmine.com.cn

Sweep, pay attention to us

Foaming production line

Current location:Homer > Product > Foaming production line

Introduction

The machine is mainly used for refrigerator&freezer door forming.It consist of drive unit,curing oven,ground rail heating and ventilation system,Carrier,foaming mixture,injection area exhausting system,earthed system,injection manipulator,pneumatic system ,mould locking device ,guide rail for mould open and close movement,hydraulic system,electrical control system.The conveyor line,working table for post treatment and high pressure forming system shall be provide by buyer.

The line adopts circular layout,which is driven by hydraulic motor with reducers and heat by steam or mould temp.


Working procedure :

Loading manually – closing fixture by guide pathway - injecting manually – heat – curing – automatically unlocking – open fixture by guide pathway – unloading manually – bubble cleaning .


General Parameters

Outer dimension:

~29500×7950×3350mm (LXWXH)

Stations:

26

Fixture size(LXW)

2000×900mm;

Mould close height: 

200mm;(Designed according to client’s requirements)

Cycle time

20s (not including manual operation time)

Heating mode:

steam or oil temp controller

Foaming agent: 

POL(Mixed cyclopentane or141b)+ISO

Injection mode:

open & vertical injection manually

Steam capacity:

200M3/h 

Curing temp:

55±5℃

Steam temp:

120≈150℃

Compressed air capacity

 1/2”(0.5Mpa) air consumption 0.1M 3/Mi

Power supply: 

steam: 25Kw(3890V、50Hz) 
Mould temp controller: 145Kw 






2018Copyright.©Huic mechanical and electrical equipment manufacturing Co., Ltd. 皖ICP备07500177号

E-mail:sunmine@sunmine.com.cn

Sweep, pay attention to us